Recent Threads

#Prefabrik @Prefabrik #Prefabrikev @Prefabrikev #Prefabrikfiyatları @Prefabrikfiyatları #Prefabrikyapı @Prefabrikyapı #Prefabrikevler @Prefabrikevler ##Konteyner #Kabın

SORU Customized Telescopic Forklift

'Prefabrik Hakkında Soru'sor' forumunda s62zg tarafından 26 Kas 2018 tarihinde açılan konu

  1. s62zg

    s62zg Yeni Üye

    26 Kas 2018
    Alınan Beğeniler:
    Ödül Puanları:
    HNT-110 telescopic forklift
    HNT-110 telescopic forklift is front-wheel drive, rear-wheel steering, rigid suspension; adopt hydro-mechanical transmission with two-speed forward and two-speed reverse, full hydraulic power steering, and air-over-oil type drum brake; the working device is composed of the three-stage quadrilateral telescopic boom and boom quick change device and hook. this telescopic forklift is not only applicable to lift the stone slabs in containers, but also can be used as a general crane, can be widely used in factory, dock, freight yard, forest farm, construction material, warehouse, logistics etc industries. it is a loading and unloading machine with wide adaptability and high efficiency.

    Product description
    1.Using well-known brand diesel engine, with National III emissions, strong power, energy saving and environment protection, to meet the requirements of efficient operations
    2.Double turbo hydraulic torque converter, stepless speed change. Single-lever control transmission system, with 2 speeds for forward and reverse gears, easier to operate
    3.Use dual-pump combined hydraulic system, greatly reduce the fuel consumption and energy consumption
    4.With full hydraulic coaxial flow amplification steering system, turning radius for rear steering axle is small, steering light and flexible
    5.Using front wheel drive, rigid suspention, rear axle steering structure, can achieve four-wheel drive. Front axle spiral bevel gear and wheel side planetary wheel to reduce the speed and increase torque, have excellent load capacity
    HNT-110 Telescopic forklift specification
    Rated load (kg)11000In main hook
    Operating weight(kg)13000
    Max. Lifting height of the main hook (mm)7605Distance from the main hook to the ground
    Max. lifting height of the complete arm (mm)10300Front point hoist
    Wheel base (mm)2988
    Front tread (mm)1638
    Rear tread (mm)1785
    Min. groud clearance (mm)310
    Overall length (mm)5288Without hook
    Overall width (mm)2310
    Overall height (mm)2715
    Height of the cab (mm)2400
    Length of rear overhang (mm)1055
    Max. outreach of the main hook (mm)4800Horizontal direction
    Max. outreach of the complete arm (mm)7900Horizontal direction
    Tipping angle of hook, up/down (°)22°/24°
    Tipping angle of big arm, up/down (°)14°/43°
    Min. turning radius (mm)6800
    Max. gradeability (°)≥20%
    Max. travelling speed (Km/h)25
    Front tyre11.00-20
    Rear tyre9.00-20
    If with fork, then the load capacity will be 5t

    HNT-110 Telescopic forklift performance parameters
    Rated lifting capacity, kg≤5000
    Dead weight, kg13000
    Max.lifting height, mm7050the height of fork upper surface to ground
    Wheelbase, mm2988
    Front wheel tread, mm1638
    Front wheel tread, mm1785
    Min.ground clearance, mm310
    Overall length, mm6230include fork
    Overall width, mm2350
    Overall height, mm2715
    Inner height of the cab2420
    Rear overhang length,mm1055
    Max.reach distance, mm5100horizontal direction
    Tilt angle of basic boom up/down14°/43°
    Min.turning radius,mm6800
    Max.travelling speed, Km/h25
    Front wheel11.00-20
    Rear wheel9.00-20
    Engine ModelDongfeng CUMMINS 4BT3.9-C100
    Rated power, KW75
    Rated speed, R/M2200

    HNT-110 Telescopic forklift configuration list
    Serial No. ItemModelManufacturer
    1EngineQSB3.9-C100Cummins(national III)
    3PumpHefei ChangyuanCBHY-G36/F4.5-ATφR
    5TransmissionZhongnan transmissionYQXD100K.970
    6Multi-way valveLinhaiCDB-F20HZT-03C
    7Steering gearZhenjiang hydrualicBZZ1-E200

    HNT-110 Telescopic Crane loader
    Item Parameter Remark
    Rated load,kg≤11000
    Operating weight kg13000
    Main hook max. lifting height ,mm7605from main hook to the ground)
    Max. lifting height with full extended boom,mm10300(front hook)
    Wheel base,mm2988
    Front wheel tread,mm1638
    Rear wheel tread,mm1785
    Min. ground clearance,mm310
    Overall length ,mm5288without arm
    Overall width, mm2350
    Overall height,mm2715
    Overall height,mm2400
    Rear overhang length,mm1055
    Main hook max. horizontal reach,mm4800(Horizontal )
    Max. horizontal reach,mm7900(Horizontal)
    Arm turnning angle up/down (°)22°/24°
    Boom turnning angle up/down(°)14°/43°
    Min. turning radius, mm6800
    Max. grade abiltiy,(°)≥20%
    Max. travelling speed,Km/h25
    Front wheel 11.00-20
    Rear wheel 9.00-20

    Serial No.NameModelManufacturer
    1Engine4BT3.9-C100(75KW,2200)DCEC Cummins
    Hefei Changyuan
    6Driving axleFront
    8Multi-way valve
    9Working oil pump
    Hefei Changyuan
    10Steering gear
    Zhenjiang hydraulicCustomized Telescopic Forklift

Bu Sayfayı Paylaş